国产安全地毯尺寸任意订制

特点

                                                                               Features

•          表面具有防滑设置，不会发生剥离，耐高温焊接

•          Surface with non-slip setting, no peeling, high temperature resistant welding.

•          最大允许 8 块安全踏垫串联使用

•          Maximum allowable 8 pieces of safety pad used in series

•          可提供特殊外形尺寸

•          Special external dimensions are available

•          响应时间最大 25ms

•          Maximum response time: 25ms

•          常规配线方式（四线制）

•          Conventional wiring mode (four-wire system)

•          配 TnerX31 继电器配线方式

•          Wiring mode is equipped with TnerX31 relay

(两线制，尾端配 1K-10K 电阻）

(Two-wire system, tail end with 1K-10K resistance)

•     安全地毯的存储条件

•   Storage condition of safety carpet

请勿在下列场合下存储安全地毯。

Do not store safety carpets on the following occasions.

1.      受到阳光直射。

1.          Be exposed to direct sunlight.

2.          环境温度在-37〜66°C 范围以外。

2.     The ambient temperature is beyond the range of-37 to 66°C.

4.      含有腐蚀性或可燃气体。

4.          Containing corrosive or flammable gases.

5.          振动或机械冲击超出额定值。

5.                     Vibration or mechanical shock exceeding rating.

6.                     受到油类、化学品溅射。

6.          By oil, chemical sputtering.

7.          含有灰尘、盐类或金属粉末的环境，

7.     An environment containing dust, salt, or metal powder,

否则可能会导致安全地毯损坏或工作不正常。

Otherwise, it may lead to safety carpet damage or abnormal work.

•    安全地毯的安装

•   Installation of safety carpet

1.      请使用专用的压边固定安全地毯的周围部分。

1.        Please use special pressing edge to fix the surrounding part of the safety carpet.

2.        请勿将安全地毯安装在表面隆起的区域，而应将其安装在平整表面上。

2.                 Do not install the safety carpet in the raised area of the surface, but on a flat surface.

3.     请勿通过拽拉电缆的方式提起或搬动安全地毯。

3.        Do not lift or move the safety carpet by pulling the cable.

4.          请勿在罩有覆盖物的情况下使用安全地毯。

4.      Do not use safety carpet with cover.